Standard design
LKB is available in three versions, LKB for ISO tubes, LKB-2 for DIN tubes and LKB-F for flange connection. The valve consists of two valve body halves, valve disc, bushes for the disc stem and seal ring. LKB-F also consists of two flanges and two flange seal rings. The valve is assembled by means of screws and nuts. Two actuator sizes, Ø85mm and Ø133mm, cover all valve sizes. The actuator is available in two versions, LKLA and LKLA-T. LKLA-T can be fitted with the top units LKT-N and LKT-S. The actuator is fitted onto the valve by means of a bracket and screws. (The actuator can also be fitted onto ball valves by means of special brackets). The handle for manual operation is fitted onto the valve by means of a cap/block system and a screw. The valve has welding ends as standard, but LKB and LKB-2 can also be supplied with fittings.
LKB is available in three versions, LKB for ISO tubes, LKB-2 for DIN tubes and LKB-F for flange connection. The valve consists of two valve body halves, valve disc, bushes for the disc stem and seal ring. LKB-F also consists of two flanges and two flange seal rings. The valve is assembled by means of screws and nuts. Two actuator sizes, Ø85mm and Ø133mm, cover all valve sizes. The actuator is available in two versions, LKLA and LKLA-T. LKLA-T can be fitted with the top units LKT-N and LKT-S. The actuator is fitted onto the valve by means of a bracket and screws. (The actuator can also be fitted onto ball valves by means of special brackets). The handle for manual operation is fitted onto the valve by means of a cap/block system and a screw. The valve has welding ends as standard, but LKB and LKB-2 can also be supplied with fittings.
Tidak ada komentar:
Posting Komentar